Stone wall cladding turns a plain wall into a surface that looks solid, warm and permanent. We cut sandstone, slate, granite and marble into cladding tiles and strips in Rajasthan for house fronts, compound walls, lobbies, feature walls and fireplaces.
A wall asks different things of stone than a floor does. Weight, fixing, weather and texture matter more than grip. This page covers which stones suit cladding, the thickness and finish buyers usually ask for, the sizes we cut, common mistakes and care.
Which Stones Suit Wall Cladding And Why
We group cladding stones by type, because the type decides how the wall weathers, how heavy each piece is and how much cleaning it needs over time.
Sandstone
Sandstone is one of the most widely used cladding stones. It is easy to split and texture, takes weather well on outside walls and comes in many earth colours. Buyers ask for Alis Teak, a teak-coloured sandstone, Alis Rainbow, a sandstone with bands of colour, and Alis Yellow, a yellow toned sandstone.
For other shades there is Autumn Brown Sandstone, Mint Fossil, Two Tone Sandstone and the dark Sagar Black.
Slate
Slate Stone splits into thin layers with a natural rough face. It gives a layered, rustic look to feature walls, gardens and boundary walls, and its low weight per piece makes it easy to fix.
Granite
Granite suits walls that must stay clean with little effort, such as lobbies, lift walls and shop fronts. Tan Brown Granite and Steel Grey Granite are dark enough to hide marks on busy walls.
Marble
Marble is best kept for indoor feature walls, since rain and pollution slowly dull its surface outdoors. Rainforest Green and Rainforest Brown have strong veins that work well behind a television or a bed.
How Cladding Stones Compare
| Stone type | Grip (if it runs onto a floor) | Upkeep | Indoor or outdoor | Typical finish |
|---|---|---|---|---|
| Sandstone | Good in natural finish | Medium, porous, so a sealer helps outdoors | Both | Natural, rockface, sandblasted |
| Slate | Good in natural cleft finish | Medium, lower grades can flake over time | Both | Natural cleft |
| Granite | Low when polished, good when flamed | Low, dense and easy to wipe | Both | Polished, flamed, leather |
| Marble | Low when polished | Higher, weathers and dulls outdoors | Mainly indoor | Polished, honed |
These are general properties of each stone type, and one lot can differ from the next. For outside walls, our guide on sandstone vs limestone explains how each handles sun and rain.
Thickness And Finish Buyers Usually Ask For
- Indoor feature walls. Buyers usually ask for 12 to 18 mm, since thinner pieces are lighter and easier to fix.
- Outside walls and house fronts. Buyers usually ask for 18 to 25 mm, which handles weather and fixing better.
- Textured looks. A natural or rockface finish on sandstone gives a rough, hand cut look. A sandblasted finish gives an even, soft texture.
- Clean modern looks. Polished or leather granite and honed marble give a smooth face that is easy to wipe.
Our granite finishes guide shows how each granite finish changes colour and texture.
Cladding Sizes We Cut
- Square and rectangle tiles such as 300 x 300 mm, 600 x 300 mm and 600 x 600 mm.
- Long strips such as 600 x 150 mm or 600 x 100 mm, for a stacked brick look.
- Random sizes laid in a free pattern, popular for sandstone and slate walls.
- Cut to size pieces for window frames, copings, pillar caps and borders.
Tell us if you need calibrated pieces, cut to one even thickness, so the face sits flat and your installer spends less time levelling.
Send us your wall sizes or an elevation drawing and we confirm what the current lot allows.
Cladding Mistakes To Avoid
- Heavy stone with adhesive alone on tall walls. High outside walls often need clamps or anchors as well. Ask your structural engineer or installer.
- Marble on outside walls. It loses its polish in rain and sun over time.
- Ordering in parts. Sandstone shade changes from lot to lot. We suggest ordering the full wall plus a small extra in one go.
- No sealer on porous stone. Unsealed sandstone near gardens or roads can pick up damp and dirt stains.
- Judging from one photo. Natural stone varies. Ask for photos of the current lot or a few sample pieces.
Caring For Stone Walls
- Brush off dust with a soft brush and rinse with plain water.
- Use a pH neutral stone cleaner for marks, not acid or bleach.
- Avoid high pressure washing on soft sandstone and slate, which can wear the surface.
- Reseal outside sandstone and slate walls when your installer advises.
- Check joints after heavy rain and fill any gaps to keep water out.
Stone Wall Cladding FAQ
Which Stone Is Best For Outside Wall Cladding?
Sandstone and granite are the most common choices for outside walls. Slate also works well where a rough, layered look is wanted.
Is Stone Cladding Heavy For A Wall?
Thin tiles add little load to a sound wall. For tall or high walls, your engineer decides the fixing method.
Does Sandstone Cladding Change Colour?
Sandstone can mellow slightly after long exposure to strong sun. A sealer slows weather staining but does not stop natural ageing.
Can I Use Floor Tiles As Cladding?
Yes, if the thickness and weight suit the wall. Thinner pieces are easier to fix on vertical surfaces.
Do You Supply Cladding For Export?
Yes. Our guide on how to order natural stone from India explains samples, packing and shipping.
Get A Price For Your Wall
Send us the stone name, wall area, piece size, thickness and finish on WhatsApp. We reply with a written quote.