Granite stairs take more wear than almost any other part of a building, since every person who comes in walks on them. We cut granite treads, risers and landing slabs in Rajasthan, along with Kota, Kadappa and sandstone steps, for homes, offices, hotels and public buildings.
A good staircase needs the right stone, the right thickness and a finish that grips. This page covers which stones suit stairs, how black and white granite are paired, the sizes we cut, common mistakes and care, so your order is right the first time.
Which Stones Suit Stairs And Why
Granite is a popular choice for stairs because it is hard, resists scratches and keeps its edge under heavy use. We group the options by colour, since colour decides how much dirt and wear a step shows.
Black Granite
Black treads hide dust and shoe marks well, which suits main entrances and busy common stairs. Buyers ask for Absolute Black Granite, Markino Black Granite and Black Forest Granite.
White And Grey Granite
Light stones make a staircase look open and bright. Kashmir White Granite, Alaska White Granite and Platinum White Granite suit homes and hotels, while Steel Grey Granite sits between light and dark.
Red And Pink Granite
Warm colours suit temples, older style homes and garden steps. Lakha Red Granite, Imperial Red Granite and Rosy Pink Granite are the red and pink options in our range.
Kota, Kadappa And Sandstone
For budget stairs, service stairs and outdoor steps, buyers choose Kota Blue, Kadappa Black or Dholpur Stone. These are softer than granite, so their edges round off faster under heavy traffic.
Black And White Granite Stairs
Pairing black and white granite is one of the most asked for stair designs. The two common layouts are white treads with black risers, or black treads with white risers.
We suggest the darker stone on the tread, where feet land, because a white tread shows dirt and wear sooner. A white riser then gives the staircase its bright look. A thin black strip near the front edge of a white tread is another option that marks the step clearly.
Order all the treads and all the risers in one go, so each colour stays even across every step.
How Stair Stones Compare
| Stone type | Grip | Upkeep | Indoor or outdoor | Typical finish |
|---|---|---|---|---|
| Granite, polished | Low when wet, better with grooves near the edge | Low | Indoor | Polished |
| Granite, flamed or leather | Good | Low | Both | Flamed, leather |
| Kota and Kadappa limestone | Fair in natural finish | Medium, edges wear sooner | Both | Natural, polished |
| Sandstone | Good in natural finish | Medium, porous, needs sealing | Mostly outdoor | Natural cleft, sandblasted |
These are general properties of each stone type. A single lot can differ, so we suggest checking a sample piece first.
Thickness And Finish Buyers Usually Ask For
- Treads. Buyers usually ask for 30 mm, or 20 mm with a doubled front edge so the step looks 40 mm thick.
- Risers. Buyers usually ask for 18 to 20 mm, since risers carry no foot traffic.
- Indoor finish. Polished treads with two or three anti slip grooves cut near the front edge.
- Outdoor finish. Flamed or leather granite, or natural sandstone, for grip in rain.
You can compare how each finish looks and grips in our granite finishes guide.
Stair Sizes We Cut
- Treads cut to the width of your stair, in one piece where the slab allows.
- Risers cut to the height of each step.
- Landing slabs for the flat area between flights.
- Skirting and side pieces that follow the slope of the stair.
- Edge profiles such as eased edge, half bullnose and full bullnose on the front of the tread.
Send us a sketch with the width, depth and height of each step and we confirm what the current lot allows.
Stair Mistakes To Avoid
- Polished treads outside. Rain makes them slippery. Use flamed or leather granite outdoors.
- One measurement for every step. Steps on site often differ by a few millimetres. Measure each one.
- No grooves on indoor treads. Grooves near the edge cost little and reduce slips.
- A white tread at a main entrance. It shows shoe marks fast. Use it on inner stairs instead.
- Too long an overhang. A tread that sticks out too far past the riser can crack. Ask your installer for the safe limit.
Caring For Stone Stairs
- Sweep daily, since grit on steps scratches polish faster than on floors.
- Mop with water and a pH neutral stone cleaner.
- Keep the grooves on treads clean so they keep their grip.
- Avoid acid cleaners on Kota and Kadappa steps.
- Seal sandstone and limestone steps when your installer advises.
Granite Stairs FAQ
Is Granite Good For Stairs?
Yes. It is hard, resists scratches and keeps its edges, which makes it one of the longest lasting stair stones.
Which Granite Is Best For Outdoor Steps?
Any dense granite in a flamed or leather finish works well. Darker colours also hide dirt from outside.
Can I Mix Black And White Granite On My Stairs?
Yes, it is a popular pairing. Order all pieces of both stones in one go so the shades match across every step.
How Do I Make Granite Stairs Less Slippery?
Choose a flamed or leather finish, or ask for anti slip grooves near the front edge of polished treads.
Do You Supply Stair Stone For Export?
Yes. Read how to order natural stone from India for samples, packing and shipping.
Get A Price For Your Stairs
Send us the stone, number of steps, tread and riser sizes, thickness and finish on WhatsApp. We reply with a written quote.